All products are made to order, please contact us for current lead times.
What we have here is the FC12 chassis-mounted rear wing for the C7 Corvette.
The lower uprights bolt through the rear crash beam and come straight up through the rear fascia. the center of the CHMSL can be retained with some careful trimming. The upper uprights are made of solid carbon fiber and are CNC cut in-house. We are currently working on the design to move the wing rearward so the hatch will open without detaching the uprights.
Full carbon mounts and uprights are included
This profile was designed with efficiency in mind and has a L/D ratio of 7.3. It works exceptionally well at low speeds and high angles of attack for autocross events as well as on road courses where average speeds are 100 mph+.
Pictured is a 78" bottom mount with standard 12”x12” endplates.
Made with 100% carbon fiber on CNC molds that ensure a precise fit, unmatched strength and stiffness as well as being extremely lightweight. You don't want to add weight to your car especially up high like a wing.
All of our wings are made with epoxy infused, intermediate modulus carbon fiber @ 60%/40% (dry) fiber to resin content at 1/2 the cost of prepreg with all the stiffness and strength of a 100% carbon fiber wing, including mounts and uprights. No cheap Polyester gel coat to peel and chip up.
The mounts pictured are spaced @15" so the uprights fit nicely between the tail lights of a C7 Corvette. No cutting tail light housings or losing the lights function.
The lower uprights are made from solid carbon fiber and bolt directly to the bumper beam for a structural mount. The upper section is also from solid carbon fiber and CNC cut for a precise fit. The 2 part design allows overall height changes to be made without having to pull the bumper cover off every time. Just swap mounts and go.
End plates and uprights included.
**Clear coat is recommended for carbon fiber parts exposed to UV and water.
